Dulux Aquashield Pre-Treatment Coat is a revolutionary waterproofing primer specifically engineered for Middle Eastern construction conditions. This advanced formula provides triple-action protection: 1. Waterproof Barrier: Creates an impenetrable moisture shield that prevents water penetration and efflorescence 2. Biological Defense: FungiClean Technology actively inhibits mold, mildew and algae growth 3. Surface Stabilization: Penetrates deep into porous substrates (up to 3mm) to strengthen and unify surfaces Ideal for UAE's humid coastal areas, this primer forms the essential foundation for durable paint systems on concrete, masonry, and plaster surfaces. Its low-VOC, water-based formula is safe for interior use while providing exterior-grade protection.
For optimal performance in UAE conditions: 1. Surface Preparation: - Remove all loose material, dirt, grease and efflorescence - Repair cracks and imperfections - Ensure surface is completely dry (moisture content <15%) 2. Primer Application: - Stir gently before and during use - Apply uniformly using brush, roller or spray equipment - Maintain wet edge to ensure continuous film - Pay special attention to porous areas 3. Environmental Conditions: - Apply between 5°C to 50°C - Avoid application in direct sunlight or rain - Relative humidity below 85% 4. Topcoating: - Allow 4-6 hours drying time (longer in high humidity) - Apply topcoat within 48 hours for optimal bonding - For exterior use, always finish with Dulux Aquashield topcoat system
