Berger Duxbak dries to touch within 1–3 hours under standard conditions. Full curing occurs after approximately 16 hours, achieving maximum water resistance and durability.
Each litre covers approximately 2–4 m² per coat, depending on the porosity and texture of the masonry. For best results, ensure uniform application and allow sufficient curing time.
Berger Duxbak is a high-performance clear water repellent designed for unpainted masonry surfaces. It penetrates deeply to protect against moisture, while allowing the surface to breathe, preventing damage and efflorescence.
This breathable coating is ideal for brick, concrete, stone, and other porous masonry surfaces, providing long-lasting protection without changing the natural appearance.
Apply Berger Duxbak in dry weather, as approximately 16 hours are required for proper curing. If the surface becomes wet during this period, the effectiveness of the treatment may be reduced.
Flood the surface using a wide brush to allow a run-off of about 12 inches, ensuring deep penetration. Alternatively, use a low-pressure conventional spray for even coverage across the masonry surface.
